FINAL YEAR PROJECT 2 (WEEK 9): Objective and Methodology

Objectives:

1) To make a progress about my presentation and final report

2) To produce a good final report as a reference in the future

Method: 

1) By making research in the internet

Objectives of this project:

1) Awareness

Checks the wearing of helmet and drunken driving

2) Auto information

Locates the place of accident and intimates it to emergency service.

Methodology Procedure

When the system is switched on, LED will be on indicating that power is supplied to the circuit. The system applied when the motorcyclist had a crashed, the helmet hits the ground and the vibration sensor detects the vibrations that were created when the helmet hits the ground. The microcontroller detected the accident occurred using vibration sensor which is placed in the helmet. After the microcontroller detects the accident occurrence, it will send Short Message Service containing an information about the accident and location of the accident using GSM and GPS modules. The GPS receives the location of the accident. This message sent to a mobile number through a message. This message received by using GSM modem present in the circuit. This message contained the latitude and longitude value and the position of the vehicle can be estimated. The GPS and GSM module was running by using the microcontroller. The alcohol sensor is used to sense the alcoholic content whether the motorcyclist drunken or not. If the alcohol was detected, it gave information to the microcontroller to inform on LCD display the person was drunk. This can be a little bit help for the helper to know the condition of the motorcyclist.

Conclusion:

By making researches in the internet, the objectives and methodology for this project can be used as a reference for readers or the project can be improved in the future.